DIY Pre-Cut Murphy Bed Instructions
These intructions are to be used with our pre-cut murphy beds. If you have any qustions be sure to let us know.
Step 2 | Headboard
Congratualtions. We have already done all the work on this for you. We have:
Cut and ripped the panel
We also put two tenons on each side. These match up with the mortices on the verticals.
We broke the edges and finish sanded it to 120 grit.
Size of this piece will be:
Twin 15 7/8" x 41 3/8
Full 15 7/8" x 56 3/8
Queen 15 7/8" x 62 3/8
Twin 15 7/8" x 43 3/8
Full 15 7/8" x 58 3/8
Queen 15 7/8" x 64 3/8
Tip: Take some scrap wood and screw it to the back of each of the verticals while you finish it. This will allow you to finish both sides at the same time.
Nothing to do here Go To Next Step: Step 3 Header