Standard Drawer Pedesal
 6 Drawer$200 for each side ($400 for complete unit) |
|---|
 6 drawer under bedThis is showing how we can make these to slide under a bed. |
Features:
-
Epoxy Coated side mount slides
-
Built
-
Built to last (designed to hold a waterbed)
-
No Particle Board.
-
Designed for quick assembly
Here is a break-down of the price example:
(We are pricing 3 drawers on each side)
3 Drawers (1/2 unit) $249
3 Drawers (1/2 unit) $249
Divider $0.00 (to make it correct width)
Total $498 (plus shipping)
(I didn't price in a platform on this one. Most of the time this lower unit is slide under an existing bed. If you are needing some decking to support a boxsprings and mattress see below)
Extras:
OSB Decking $75 (to support box springs and mattress)
Upgrade to full extension/ball bearing rails $10/drawer
Cedar lined drawers $20/drawer
60" long drawer at foot full size (9"w) $100
60" long drawer at foot Queen size (15"w) $120
60" long drawer at foot King size (30"w) $200
Since we are totally custom, next step is to confirm the price.
This space saving drawers are the perfect storage solution. The standards height is 9 1/4" tall, but can do custom sizes. It comes in two units, a left and a right. We can change configurations for either side (example 3 drawer unit on one side with 2 drawer with door on the other).
Sizes
We configure these for any size. We make each 1/2 unit the same (72"l x 21 1/4"d x 9 1/4"h) What determines the differnet sizes is the center divider. On the queen and king we can utilize that center space with a door or drawer
Different configurations (need 2 of the 1/2 units to make a complete pedestal:
3 Drawers (1/2 unit) $249
Door Kit (need one on all sizes except twin)
This pedestal is too low for a door kit. There will just be a solid divider.
Twin: No divider used
Full: 13"w divider
Queen: 19" divider
King 34" divider
Platforms
To support the mattress, each bed would need a platform. This replaces the box springs and gives the mattress its correct support.
Twin $85
Full $100
Queen $150
King $200
(Only exceptions for the platform is if this is going under a waterbed or sliding under a bed with self supporting siderails (connected to headboard and footboard)
Take note of the style and features you may want.
Colors: Shown here on oak. Other woods may have a differnt shade and grain to them. Ask for a sample if needed.
Custom Colors Availiable. We can match a drawer, shelf or anything else. Contact us for more details.
Murphy Bed Frequently Asked Questions
Frequently asked questions are listed questions and answers.
Can you do custom sizes?
Yes we can. Supply us with your measurements and we will design one to fit your space. We even will work with your contractor if you want more of a built in look.
I've seen some that use particle board with a fake wood grain over it. Do you use that?
No, we don't even offer that as an option. That is melamine and is very heavy. In fact we don't use anything with particle board.
What if I want more of a built in look?
There are things we can do to make that happen. First we build the bookcases with a scribe molding. Without going into too much detail it helps the piece fit in the corner better. We then supply some trim pieces to help finish it out. Other things that we do will be to leave the crown and base molding long and let you cut it down. There are ways we can accomplish this with the level of comfort you have in woodworking. Contact us for more details. If you need some examples let me know.
I see oak and maple a lot on your site. Do you offer any other type of wood?
Yes, everything is totally custom and we can use whatever wood that is available. We've used Mahogany, Walnut, Cherry, Tamo Ash, Lacewood, Figured Maple.
What if I don't know how to choose a color?
We have a color page that has the common colors from Minwax on them. This may give you a starting point. We can always mail out a real sample (colors can vary from monitor to monitor). Also we can match your existing furniture. If you have a shelf, drawer or anything you can send to use, we will match it.
Shipping
These units do break down to very manageable units, but are still too large for UPS. We do ship on large freight lines to your house. You will be responsible for getting it in the house. We will ship to anywhere in the Continental United States to your front door. Request a quote for more information and exact shipping charges.
Shipping outside the US call for quotes.
We ship using a "Home Delivery" option with the freight lines. They will schedule the drop of time and date with you once you receive it. Because of the weight you'll need help getting your furniture off the truck and into your house. Note: drivers are not required to help you in the house. If you need lift gate service, let us know that can be arranged. The additional charge is around $95.
When you receive your items, check all boxes for damage and MAKE SURE TO NOTE ON FREIGHT BILL if there is any. We will help you with filing damage claims. More information see our Shipping page.
Ordering
Information required when ordering:
-
Bed size (twin, full, queen, or special size)
-
Fold out direction (Horizontal or Vertical)
-
Style and features
-
Wood type
-
Stain color (this may be determined at a later time. Staining is one of the last steps before shipping). We use Minwax products. Check out their colors at
-
Type of wall Murphy bed is going against (wood studs, metal studs, block, brick, or plaster)
-
You may want to send a quote first Send a Quote
-
After a quote is returned back to you you may reply to the email and we will contact you to finalize the order.
We take all major credit cards and money orders. Since these beds are custom built our payment options are as follows:
-
20% down for scheduling.
-
Balance due upon shipping, delivery, or pick-up.
-
If paying with credit card, we only require 20% down to schedule your furniture.